x
Burnstop

BURNSTOP IM-Wood Basic

BURNSTOP IM-Wood Basic is a highly effective impregnating agent specifically developed for impregnation of wood, wooden panels, wood derivatives, etc.
Burnstop IM-WOOD BASIC grants excellent flame retardent properties to the wood supports on which it is applied.

Consumption

between 3 and 4 m² per liter, depending on the porosity of the surface.
Application with a low pressure pump (3 to 5 bars), with a brush or by dipping in the product.

Tests & reports

Burnstop IM-Wood Basic has been tested in the Laboratory for the use of fuels and heat transfer in Ghent according to the NF P 92-501 standard. The tested samples are classified as follows: Class A1 according to standard NBN 21 -203 and Class M1 according to standard NF P 92-507

Properties

  • Nontoxic
  • Biodegradable
  • Not aggressive for wood and fibers
  • Fast penetration into the surface and fast drying time
  • Colorless and odorless
  • The product is not flammable and not explosive

BURNSTOP IM-Wood Coat

BURNSTOP IM-Wood Coat Fire retardant liquid for materials with poor absorbtion like OSB, bamboo.

Consumption

between 3 and 4 m² per liter, depending on the porosity of the surface.
Application with a low pressure pump (3 to 5 bars), with a brush or by dipping in the product.

Tests & reports

Burnstop IM-Wood Coat has been tested in Warrington (Ghent) on a parquet floor. The product meets the European requirements (for floors). The fire behavior (reaction to fire) has been tested and "Bfl-s1" was the result.

Properties

  • Nontoxic
  • Biodegradable
  • Not aggressive for wood and fibers
  • Fast penetration into the surface and fast drying time
  • Colorless and odorless
  • The product is not flammable and not explosive

BURNSTOP IM-Wood Exterior

BURNSTOP IM-Wood Exterior Fire retardant liquid for impregnation of wood for outdoor use. For wooden facades ( the product also offers a water-repellent protection).

Consumption

between 3 and 4 m² per liter, depending on the porosity of the surface.
Application with a low pressure pump (3 to 5 bars), with a brush or by dipping in the product.

Tests & reports

According to the test results with NF P 92-501 standard, the BURNSTOP IM-Wood Exterior belongs to class A2, in accordance with annex 5 of the Royal Decree of 19 December 1997.

Properties

  • Nontoxic
  • Biodegradable
  • Not aggressive for wood and fibers
  • Fast penetration into the surface and fast drying time
  • Colorless and odorless
  • The product is not flammable and not explosive

BURNSTOP IM-Wood Plus

BURNSTOP IM-Wood Plus Fire retardant liquid for impregnation of wood materials like parquet, stairs, MDF.

Consumption

between 3 and 4 m² per liter, depending on the porosity of the surface.
Application with a low pressure pump (3 to 5 bars), with a brush or by dipping in the product.

Tests & reports

Burnstop IM-Wood Coat has been tested in Warrington (Ghent) on a parquet floor. The product meets the European requirements (for floors). The fire behavior (reaction to fire) has been tested and "Bfl-s1" was the result.

Properties

  • Nontoxic
  • Biodegradable
  • Not aggressive for wood and fibers
  • Fast penetration into the surface and fast drying time
  • Colorless and odorless
  • The product is not flammable and not explosive

Experience and knowledge

Mr Christiaan Vogt has been active in all aspects of fire safety for more than 15 years. With his company Fire-Proof, he is still one of the leading companies in that sector.

In addition to using the autoclave and its own Burnstop product, Fire-Proof also supplies the following products that ensure optimum fire resistance, fire repression, flame delaying, fire prevention and partitioning.

Generaal Lemanstraat 38, 2600 Berchem