  |
|
Producten van onze firma
Graffiti Magic (Technical Data Sheet)
Graffiti Magic
Suitable Substrates -Graffiti Magic is suitable for a wide variety of surfaces including: brick, stone, concrete, wood and metal. To achieve optimum performance Graffiti Magic is usually applied 2 coats over a Graffiti Magic Clear Non-darkening Sealer or Graffiti Magic Colour Coat. It can however be applied directly to some bare substrates or existing coatings, though very porous surfaces may require 3 coats.
Application - Application is by brush roller or spray. But if spraying take care not to contaminate surrounding properties. Graffiti Magic is a White Spirit based product and can be applied in much the same way as a conventional solvent based lacquer. However it is important to note that Graffiti Magic is a Moisture curing Product. The product must be applied at the correct spread rate of 8 to 10m² per l to achieve the required film thickness.
Moisture Curing- This means that the product will start to cure when it comes into contact with atmospheric moisture. The rate of cure will depend on the relative temperature and humidity. Therefore only decant as much material as you can easily use in 30 to 60 mins, and replace the lids immediately. If the product is contaminated with water it will start to cure straight away. Once opened tins should be used that day and not stored.
Tools- All spray equipment should be washed through with gun wash immediately after use. Brushes and rollers used on small jobs may be washed out straight away with brush cleaner or strong thinners. Brushes and rollers used on larger work may have to be discarded. This should be taken into account when pricing for work.
If you require any further information contact the technical department of Graffiti Magic, who will be pleased to give advice.
Beschikbare info over het product:
